Arnold & Son Replica Archives - Page 2 of 4 - How To Find Best Replica Watch To Buy

Should I Buy Arnold & Son Constant Force Tourbillon Watch Replica Watches Young Professional

When trying to solve a problem, the beginning is always a good place to start. That’s exactly the process followed by Arnold & Son in their attempt to eliminate isochronal error from one of their newest pieces, the Arnold & Son Constant Force Tourbillon. Arnold & Son’s heritage exists in the legacy of John Arnold and his son, two of the greatest watchmakers to ever come out of England. So revered was Arnold that Abraham-Louis Breguet himself sent him his own son as an apprentice, while Arnold returned the favour. Having packed off his son to learn at the knee of the Swiss maestro, Arnold turned his attentions to the problem of the times: the quest for chronometric accuracy at sea.

One of the greatest problems when it comes to accuracy is moderating the supply of power to the regulating organ of the timepiece (in this case, the tourbillon featured in the lower right quadrant of the dial). The mainspring, like any component of this size, is susceptible to certain molecular inconsistencies acquired during the creation process. Any external or internal inconsistency could result in a fluctuation of power delivered to the gear train. And that’s before one even considers the drastic drop-off in torque when the mainspring sufficiently uncoils. As the mainspring winds down, the amount of power delivered to the escapement dips. This can potentially play havoc with the timekeeping, so Arnold & Son have tried to eliminate this error by installing a “constant-force” mechanism. The modern incarnation of the company that lay dormant for over a century is doing what it can to reconnect with the source of its inspiration.

Practically speaking, this component takes the place of a fuseé, which is an old-fashioned constant force complication we’ve seen on aBlogtoWatch very recently in the new Zenith Academy Georges Favre-Jacot Anniversary piece (read the review here), for example. To compensate for the inevitable drop-off in power generated by a single barrel in a standard set-up, Arnold & Son have started out with two symmetrical barrels in series. The first barrel powers the gear train, while the second barrel tops up the torque of the first whenever it drops below an optimal level. But their innovation does not stop there…

Instead of the power from the mainspring flowing directly into the escapement, it must first pass through Arnold & Son’s constant force mechanism. The already regulated power supply charges a small hairspring, which releases a consistent amount of force to the tourbillon once per second. With this mechanism, there will still come a point when the power released by the twin barrels and the constant force mechanism drops below a point that is sufficient to maintain a regular output. When this happens, the watch stops rather than allowing an isochronal error to creep into the timekeeping.

One of the greatest problems when it comes to precision is moderating the supply of power to the regulating organ of this timepiece (in this case, the tourbillon featured at the lower right quadrant of the dial). The mainspring, for example any part of this size, is susceptible to particular molecular inconsistencies acquired during the production procedure. Any internal or external inconsistency could result in a fluctuation of power delivered into the gear train. And that is before one even believes the extreme drop-off in torque once the mainspring satisfactorily uncoils. As the mainspring winds down, the total amount of power delivered to the escapement dips. This can potentially play havoc with the timekeeping, so Arnold & Son have tried to eliminate this error by installing a “constant-force” mechanism. The modern incarnation of the company that lay dormant for over a century is doing what it can to reconnect with the origin of its inspiration.Practically talking, this component takes the place of a fuseé, which can be an old-fashioned constant force complication we’ve observed on aBlogtoWatch very recently in the new Zenith Academy Georges Favre-Jacot Anniversary piece (read the review), for instance. To compensate for the inevitable drop-off in electricity generated by one barrel in a normal set-up, Arnold & Son have started out with two symmetrical barrels in series. The first barrel powers the gear train, while the next barrel tops up the torque of the first if it drops below an optimal amount. However, their invention doesn’t stop there.

In addition to this interesting solution, the Arnold & Son Constant Force Tourbillon features a deadbeat seconds complication, which causes the seconds hand to “tick” rather than sweep as one might expect in a mechanical timepiece. Exceptional consistency is achieved thanks to the symmetry of the movement’s construction, as well as the fact that the constant force escapement remains stationary throughout operation, while the tourbillon cage rotates once per minute. This is in an attempt to reduce the influence of gravity on the escapement’s operation. Assuming, though, that this watch is unlikely to be worn in the presence of strong magnetic fields (it’s hardly suitable for use on a construction site or while flying a helicopter, for example), the complication perfectly suits the intended application.

The Arnold & Son Constant Force Tourbillon watch is a limited edition of which only 28 will be made. It has a 46mm 18ct rose gold case fitted with an anti-reflective sapphire crystal and a sapphire display back. The A&S5119 movement has 39 jewels, a thickness of 6mm, a 90-hour power reserve, and operates at 21,600vph. The NAC grey mainplate and the palladium-coated bridges are made of nickel-silver and hand-finished with polished edges and brushed surfaces, gold screw-down chatons, and bevelled and polished screw heads. The movement is almost perfectly symmetrical, and all the technical components are visible on the dial-side. The three-dimensional movement architecture is designed to echo the English tradition of marine chronometer construction. The watch is water resistant to 30 metres and comes on a hand-stitched brown leather alligator strap. Price is available on request. arnoldandson.com

Who Sells The Best Arnold & Son Nebula Watch Hands-On Replica Wholesale

One thing I have in common with Arnold & Son’s designer for movements and overall brand aesthetic, Sebastien Chaulmontet, is a love of symmetry. No, not all of the things he designs are perfectly symmetrical – after all, there must be some variety in life – but he tries harder than perhaps anyone else when it comes to both the case and dial of a watch, as well as the movement, to achieve aesthetic balance. The Arnold & Son Nebula – which is a new model for 2016 – is all about that the quest to make a movement as symmetrical-looking as possible.

Do a survey of the world’s most popular designs and you’ll find that people are attracted to symmetry – especially bilateral symmetry. With the Nebula, Arnold & Son tries to go beyond that with a movement design that offers a large amount of bilateral symmetry if cut either vertically or horizontally. Of course, it isn’t perfect symmetry, but that isn’t the point. The main idea here is to experiment with this fascinating movement architecture and see how it makes having a skeletonized dial even better. What do you think?

Many forms of movement skeletonization take a non-skeletonized movement and try to cut it up. One of the most popular movements out there that receives this treatment is the humble ETA UNITAS (6497 and 6498) that has seen a large range of techniques to carve it up in artistic ways. Skeletonization started out by actually having to skeletonize something, but more recently movements are being designed from the ground up to be visible. This is what Arnold & Son has done with many of their movements, including the caliber A&S5101 that exists inside of the Arnold & Son Nebula. One of the less frequently discussed things about Arnold & Son is that despite making less than 1000 watches per year, their new models mostly have new movements.

This is possible because they are part of the Swiss watch movement maker La Joux-Perret (yes, it is owned by the Citizen Group from Japan – but they don’t really make any decisions about how it is run, to be honest), which gives Arnold & Son the ability to do things most of its competitors simply can’t. At least not on this scale. What is really driving the innovation forward is probably Sebastien, who just has too many ideas to remain idle.

Skeletonizing a watch is no easy feat. And it’s doubly difficult for an ultra-thin movement, largely because the motion is already so sparse that removing any more material is likely to influence structural rigidity. Because of this, the A&S8200 calibre in the Arnold & Son UTTE Skeleton watch had to be thoroughly redesigned and re-engineered. The outcome is that the A&S8220 calibre, which measures 3.3mm thick. The additional thickness, based on Arnold & Son, is imperative to ensure rigidity as they sought to skeletonized the movement. However, let us face it, 3.3mm for a tourbillon motion with two barrels and a power reserve of at least 90 hours is seriously impressive.The new A&S8220 calibre boasts a few major revisions. For instance, the main plate was greatly modified to reveal as much as you can of the internal workings. But maybe what’s visible to owners is that the tourbillon cage has been totally reworked to show off more of this mechanism while retaining the three-dimensional design that has become a signature of the earlier Arnold & Son UTTE watch. Additionally, the tourbillon cage is relatively large when compared with this motion. This means it is the single most dominating element of the dialup, and in addition to that is the simple fact that the crate is fully hand-polished and chamfered, making it a true visual treat for owners.And because you’d expect, the A&S8220 calibre is also treated to the finest haute horlogerie completing: The principal plate and bridges are constructed using nickel silver and completed with C?tes de Genève rayonnantes; The borders are also polished and chamfered; The steel components, gears, and ratchets are satin-finished using their borders polished and chamfered; The screws have bevelled and polished heads, and finally, the stones are placed in polished countersinks; Reading of the time is done off a sapphire disc with printed numerals at 12 o’clock; The hour and minute hands are gold and characteristic white lacquered hints.

Ignore the movement and dial, and the Arnold & Son Nebula is very much what we’ve come to expect from Arnold & Son dress-style watches. The Arnold & Son Nebula comes in either steel or 18k red gold, and the case is 41.5mm wide and 8.73mm thick – making it extremely wearable. It isn’t the smallest or the largest dress watch that Arnold & Son makes, but with its thinner case and classical proportions it certainly works well as a more formal timepiece.

In images, the three-dimensional depth of the dial is hard to convey. For me, that is really the magic of looking into the Arnold & Son Nebula – in addition to the visually very appealing symmetry of the movement architecture. Arnold & Son isn’t going to beat Patek Philippe, Chopard, or Vacheron Constantin these days when it comes to the level of movement finishing, but it is pretty good – especially for the money. More importantly, over the years I’ve actually seen it get better – for example, in how they do the beveled edges on the ends of movement bridges or wheels.

The movement architecture and overall look, while technically new, is clearly based on the long-standing Arnold & Son TB88 watch collection. Starting with that watch, Arnold & Son began down a long road of bringing the bits and pieces of the movement that are normally hidden on the caseback to the foreground on the dial. This includes double mainspring barrels on the top, and a subsidiary seconds dial adjacent to the balance wheel and escapement below. If anything, the increased skeletonization and visual symmetry of the A&S5101 and the Arnold & Son Nebula overall represent an evolution and refinement of the TB88 collection.

The rear of the Arnold & Son Nebula isn’t bad-looking either. Arnold & Son makes good use of contrasting finishes and colors to bring out a variety of details in the movement – which is the type of stuff that watch aficionados eat up. This is the visceral part of watchmaking that Arnold & Son understands pretty well. They may lack muscle in marketing and branding, but there is a lot to love at the brand where it arguably counts.

Arnold & Son’s caliber A&S5101 manually wound movement operates at 3Hz (21,600bph) with 90 hours of power reserve between the two mainspring barrels. The most distinctive feature, of course, is the seven classical-style bridges that are mounted radially around the movement that hold most of the components together. As usual, legibility is maintained through properly sized hands and a minute/hour track along the chapter ring. The steel and gold versions of the Arnold & Son Nebula have slightly different dial finish colors as well.

Each of the two Arnold & Son Nebula watches are available on black or brown alligator straps. The steel model can also come with a gray, brown, or blue leather straps (the same as those you can see here when we looked at the Arnold & Son Eight-Day Royal Navy watch). For those who liked the idea of the TB88 but felt that it wasn’t refined enough or too large, the Arnold & Son Nebula is a good choice. Price for the Arnold & Son Nebula reference 1NEAS.B01A.D134A in steel is $14,500 USD and the reference 1NEAR.S01A.D135A in 18k red gold is $25,750. arnoldandson.com

How To Buy Arnold & Son HM Perpetual Moon Stainless Steel Watch With Blue Guilloche Dial Replica At Best Price

Once set, the accuracy should hold for 122 years, after which a simple adjustment will ensure it to get another 122 years. The hand-wound motion is an Arnold & Son manufacture A&S1512 which defeats at 21,600 bph with a 90-hour power reserve. As if the situation back weren’t amazing enough, the C?tes de Genève revealed during the movement is just lovely.The Arnold & Son HM Double Hemisphere Perpetual Moon includes a brown or black hand-stitched alligator strap and is guaranteed to grab the eye of many an eye lover. When attempting to solve a problem, the start is always a good place to get started. That’s precisely the procedure followed by Arnold & Son in their endeavor to get rid of isochronal mistake from one of the latest bits, the Arnold & Son Continuous Force Tourbillon. Arnold & Son’s heritage is present in the legacy of John Arnold and his son, a couple of the greatest watchmakers to ever come from England. So revered was Arnold that Abraham-Louis Breguet himself delivered him his own son as an apprentice, while Arnold returned the favour. Having packed his son off to learn in the knee of the Swiss maestro, Arnold turned his attentions to the issue of these times: the pursuit for chronometric accuracy at sea.

Though a young brand, Arnold & Son is responsible for some memorable watches we have seen over the past few years. The wonderful Time Pyramid watch (reviewed here) as well as the Arnold & Son HM Perpetual Moon watch come to mind in particular. Now, a new version of the latter in stainless steel with a blue guilloche dial and blue guilloche moon phase disc has been announced. The shade of blue seems to be the same bright and deep blue as the red gold model, and the large moon and its accompanying stars are silver. It’s a great mix of colors that recreates the feeling of looking up on a moon on a cloudless night.

When the Arnold & Son HM Perpetual Moon watch was announced, the red gold with blue guilloche dial variant was the one that stood out most for me. The bright and deep blue of the dial is simply mesmerizing, especially when it’s juxtaposed with the gold moon. Unfortunately, because of its precious metal case, that meant this particular variant has a high price. Arnold & Son has a stainless steel variant, but that came with a black guilloche dial with a silver moon, which, although is a better approximation of what the moon would look like in the night sky, is just not as vibrant as the blue.

Most moon phase watches usually make do with just a small aperture for the display. The Arnold & Son HM Perpetual Moon watch, however, goes all out and offers its owner a large display of the moon with a large moon phase aperture that stretches from 10 to 2 o’clock and a moon phase disc that measures a whopping 29mm. The diameter of the moon alone, in case you were wondering, is 11.2mm. It’s also worth mentioning at this point that the moon itself looks very realistic because it was made from an initial hand-engraved model that has been duplicated for series production. The large moon phase display also never feels overwhelming because the case is a very modern 42mm in diameter. In all, the large moon phase display and the contemporary size of the case makes for a very harmonious overall look.

Underneath, this new Arnold & Son HM Perpetual Moon in stainless steel with blue guilloche dial watch is powered by the in-house-made hand-wound caliber A&S1512, which can be admired through the sapphire caseback. This particular caliber was created from the ground up to display the moon phase, and as a result, it is extremely accurate – to the tune of one day every 122 years. After 122 years, a single push on the corrector will sync the moon phase indication for another 122 years.

The 3Hz caliber A&S1512 also features double barrels which give it a power reserve of a very respectable 90 hours. The movement is also decorated to a very high standard and features manually chamfered bridges with polished edges, circular graining on the wheels, flame-blued screws, mirror polished heads and Côtes de Geneve finishing on the bridges. And as if the large moon phase display on the dial isn’t enough, there is also an eight-stage indication of the moon phase on the rear of the movement.

All things considered, this new version of the Arnold & Son HM Perpetual Moon watch is a fantastic choice for those who want a classically styled watch with a twist. It comes with a choice of a hand-stitched black or brown alligator leather strap and it is priced at $17,200. arnoldandson.com

High End Arnold & Son Eight-Day Royal Navy Watch Hands-On Replica Trusted Dealers

While it isn’t glitzed up with new technology or a fancy story, the new Arnold & Son Eight-Day Royal Navy is most certainly a sleeper hit of Baselworld 2016 with an attractive dial, good-looking and useful movement, and all-around decent price in three new steel-case models.

Arnold & Son isn’t shy about saying that the Eight-Day Royal Navy is their own personal entrant into the “marine chronometer-inspired” wrist watch arena. This segment isn’t super crowded, but other brands like Ulysse Nardin tend to have more years of experience in producing watches like this. With that said, if you look at the minor details, then you’ll notice that Arnold & Son is indeed bringing its own unique marine chronometer-style watch to the table with the Arnold & Son Eight-Day Royal Navy.

One of the most impressive things from an exclusivity standpoint is that Arnold & Son still produces under 1000 watches per year (about 800, last I heard) – and yet they are able to continually come out with new and interesting movements. This is, of course, due in part to their ownership by movement maker La Joux-Perret (which in turn is owned by Citizen). This gives Arnold & Son a unique access to people and machinery to do all kinds of crazy stuff like make a huge variety of movements, each in relatively small numbers – something most other brands of this size cannot enjoy.

At 43mm wide (water resistant to 30 meters) in a deceptively complicated (yet refined) steel case, the Arnold & Son Eight-Day Royal Navy is also just 10.7mm thick with an expansive sapphire crystal caseback window showing off the new in-house-made manually wound movement (more on that in a moment). The dial layout is typical “marine chronometer” with the main dial for the time and a symmetrical layout for the power reserve indicator under 12 o’clock, and a subsidiary seconds dial over 6 o’clock.

What makes the dials really special is machine guilloche engraving which is then lacquered for color. The “squiggly line” style pattern (I’m certain that is how the French-speaking horologers of old would refer to them – “le squiggelle!”) are lovely and the dials of the Arnold & Son Eight-Day Royal Navy watches are offered in either blue, black, or silver… along with good-looking matching calf leather straps.

For Baselworld 2017, Arnold & Son unveiled yet another masterfully skeletonized watch which conveys the brand’s conceptual DNA forward. The Arnold & Son DBG Skeleton is the most recent addition to the DBG (Double-Balance GMT) set which we reviewed the original, non-skeletonized variant of in larger detail back in 2013. For all those unfamiliar with this particular piece, it’s essentially two motions which share a winding platform, housed in one watch. Skeletonized, this watch looks incredible and is the perfect illustration of Arnold & Son’s relentless progress.First, a tiny bit more about Arnold & Son’s DBG system. Every time screen is powered by its barrel, with its equipment train, escapement, and equilibrium, while sharing a single winding system. While this isn’t necessarily unprecedented, because of the offsets of these shared elements when compared with the individual parts, it isn’t always pretty, and seldom skeletonized. But with all the DBG Skeleton, we see virtually perfect symmetry on the dial and caseback.The unusual nature of the in-house A&S1309 movement allows for some additional mechanical and functional advantages. For instance, due to the separate socket, gear train, and escapement/balance, the GMT purpose comprises a “minutes” hand instead of the conventional 24-hour counter only. Each time zone screen from the Arnold & Son DBG Skeleton can be set to incremental quarters of this hour. So for some Indian, Australian, and Canadian time zones which are off by half-hours, for example, the watch can account for this. Additionally, the Equation of Time display at 12 o’clock determines the difference between each display, as well as whether it is night or day in the next time zone. The A&S1309 beats at 21,600bph and comes with a 40-hour power reserve.

Legibility and sexiness is high on the dials which have, in my opinion, the right mixture of class and sophistication, as well as a tendency to grab attention. Strong yet traditional-looking hands add a sense of masculine purpose, and Arnold & Son was even able to insert a date indicator window into the mix (in the subsidiary seconds dial).

Powering the Arnold & Son Eight-Day Royal Navy watches is the newly developed Arnold & Son caliber A&S1016 manually wound movement. At just 4.7mm thick, the movement offers a full eight days (192 hours) of power reserve (between two barrels) operating at 3Hz (21,600bph).

Arnold & Son is good about offering a lot of visual appeal to their movements, combining polished decoration as well as color through liberal use of blued-steel screws, gold chatons, and large synthetic ruby jewels. For the most part, the bridges are also “palladium-treated.” For the money, there is a lot of value here in terms of both visual design and functionality (not to mention that element of exclusivity I discussed previously).

As a dressier or business watch, the Arnold & Son Eight-Day Royal Navy says a lot of good things about the wearer and given the versatility of the dial designs and strap colors, I think that Arnold & Son will do very well with these watches. There isn’t a lot of hidden details, meaning that what also is good about the Arnold & Son Eight-Day Royal Navy collection is that consumers need only a few minutes to understand what they are getting. Arnold & Son matched the reference 1EDAS.U01A.D136A watch with the blue dial to a blue strap, and the reference 1EDAS.B01A.D134A gets a really cool matching gradient gray strap. The reference 1EDAS.S01A.D135A comes on a cool gradient (ahem, “hand-aged”) brown strap. Price for each of the Arnold & Son Eight-Day Royal Navy watches is $12,950 USD. arnoldandson.com

Where Can I Buy Updated Arnold & Son Golden Wheel Watch With Wandering Hours Replica Watches Online Safe

Arnold & Son has a long and storied past filled with ornate complications that herald fine watchmaking and elegant design. In their newest addition to the Instrument Collection, the new Golden Wheel is updated from the previous model with touches like black numerals on the sapphire discs, a new outer ring on the dial, and a black ADLC dial plate. The Arnold & Son Golden Wheel Ref.1HVAR.M01A.C120A carries over the tradition of the Golden Wheel line, which was the first watch to have both wandering hours and true beat seconds complications together. A unique piece in an 18k red gold case, this watch looks as cool as ever.

The mother-of-pearl arc reaching from 10 to 2 provides a backdrop to the current hour that is displayed as a numeral that moves along a minute track, while the true or “dead” beat seconds are indicated by the central hand. The hours make their way to the top via three floating sapphire crystals that seem to hover above the dial with a simple arrow above each numeral to indicate the minutes. Wandering hours as a complication originates as far back as the 17th century, when it could be found in table clocks or those commissioned by such figures as Pope Alexander XII in 1656. Eventually, the craft made its way into pocket watches and as a result to modern wristwatches, which is quite a technical feat. Arnold & Son place a lot of emphasis on the fact that the Arnold & Son Golden Wheel is the world’s first wandering hour complication with true beat seconds in a wristwatch. True beat seconds, of course, create an effect in which the second hand “ticks” or “beats” each second rather than the customary sweeping motion typical of mechanical watches.

The new Arnold & Son Golden Wheel is housed in a 44mm 18k red-gold case with a 30-meter water-resistance and cambered sapphire crystals on the front and back. That’s not the only sapphire at work here, though. This new version features black numerals on the three sapphire discs as well as an ADLC treated dial plate with Côtes de Genève finishing and a newly designed outer ring, all of which promises to increase readability. The previous version featured golden numerals, so the black will surely ease the wearer’s eye here.

At 12 o’clock is a day/night indicator for both GMT time and home time, using fitting skeletonized and filled hands to tell them apart. The bottom half of this indicator is darkened, which assists the visual representation of this “night” portion of this disk. I do want the Arnold & Son logo was located elsewhere though, as its place interrupting the moments monitor at 12 o’clock can make exact time-setting difficult. Another niggling issue I discovered was that the next hand counterweight closely emulates the look of the house time hands, which may occasionally cause a moment of confusion when you glance down and see three hands pointing towards that dial. In an ideal world, I’d have loved to see the moment hands on each dial stretched just a bit further to correctly reach the minute track, and the hour hands shortened a bit to not overlap the hour mark, but that is a little aesthetic qualm which doesn’t impact utility.On the reverse side of this Arnold & Son DBG Skeleton, the bottom plate of this manufacture bore A&S1309 is revealed. The motion is made of nickel silver (also known as German silver or Maillechort, an alloy of copper, nickel and zinc) which was rhodium-plated and decorated using C?tes de Genève. The wheels are satin-finished and provide a contrasting three dimensional texture to the base plate, and involving the chamfered edges of the bridges, the golden gear train can be viewed. The movement is hand wound obviously, which contributes to its thinness at a mere 3.9mm. It features 42 stones and offers a 40 hour power reserve while the double accounts oscillate at 21,600vph, or 3Hz. That is definitely a highly refined motion, but compared to the depth of detail offered by this skeletonized dial, the reverse side of the movement almost feels like a letdown.

The Arnold & Son Golden Wheel is powered by the Arnold & Son manufacture self-winding A&S6018 that runs at 28,800vph and offers a 45-hour power reserve. Featuring hand-chamfered bridges, the movement is treated with palladium and has Côtes de Genève rayonnantes. The skeletonized weight is also palladium-treated and has smooth, brushed surfaces to create a fluid experience.

The update to the Arnold & Son Golden Wheel definitely increases the contrast and legibility of an already beautiful timepiece. I much prefer this variant to the previous for the inclusion of the black numerals on the sapphire discs alone. A wandering hours complication is rare, and Arnold & Son has managed to keep improving. It is always nice to see a brand not only take on the more complex complications, but pair them with special features such as the true beat seconds we have in this instance.

The Arnold & Son Golden Wheel comes paired with a dressy hand-stitched alligator leather strap in either brown or black. Pricing is $47,500. arnoldandson.com

Discount Arnold & Son Royal TES Tourbillon With A Sapphire Twist Replica Buyers Guide

Once set, the precision should hold for 122 decades, after which a simple adjustment will guarantee it for another 122 decades. The hand-wound motion is an Arnold & Son manufacture A&S1512 that beats at 21,600 bph with a 90-hour power book. As if the situation back were not beautiful enough, the C?tes de Genève revealed throughout the movement is just lovely.The Arnold & Son HM Double Hemisphere Perpetual Moon comes with a black or brownish hand-stitched alligator strap and is sure to grab the eye of many a watch buff. The Arnold & Son HM Double Hemisphere Perpetual Moon watch is priced at $30,500. When attempting to fix a issue, the beginning is always a fantastic place to get started. That’s precisely the process followed closely by Arnold & Son in their attempt to get rid of isochronal error from one of the latest pieces, the Arnold & Son Constant Force Tourbillon. Arnold & Son’s heritage is present in the heritage of John Arnold and his son, two of the greatest watchmakers to ever come from England. Having packed his son off to learn in the back of the maestro, Arnold turned his attentions to the problem of the times: the pursuit for chronometric accuracy at sea.

We have said this before and will say it again: the tourbillon, as visually arresting and technically challenging of a complication as it is, over the course of the last decade or so, has become more and more widely available, with just about any and all higher-end brands featuring it in their portfolios. The Arnold & Son Royal TES Tourbillon manages to spice things up just enough to render the “whirlwind” in watchmaking more refreshing and fascinating, all the while leaving this over 2-century-old invention nearly perfectly intact.

So how does Arnold & Son’s achievement justify this potentially controversial assertion? First, let’s see where the Arnold & Son Royal TES Tourbillon watch remains business as usual. As far as actual performance is concerned, this 2014 novelty features the more ubiquitous 1-minute tourbillon, in this case, operating at 3 Hertz, or 21,600 vibrations per hour. And while that is slightly above the 18 thousand beats per hour standard of tourbillons, this negligible increase in speed is nothing to write home about. In other words, no crazily slow or fast speed, additional axes or other sci-fi-worthy twists to be marveled at here. What makes the Arnold & Son Royal TES Tourbillon watch more unique, therefore, is not its actual performance but rather its unique looks: basically, the entire movement looks as though it was installed the wrong way up, meaning that most “internals” usually facing the case back side of the watch are now situated on the dial side. And when we say visible, we mean a splendid view that is available for the wearer any time he or she chooses to glance at the watch.

On the image just above you see both sides of the movement, with the case-back view of it being to the left, while the dial-side of the A&S8100 caliber is to the right – exactly the other way around from what you would expect. And while this is not the first time we meet the concept of the “inside-out movement,” where Arnold & Son takes this (nearly) X-rated exhibition of watchmaking goodness a step further is by placing a large sapphire crystal bridge over most of the upper half of the movement.

This sapphire bridge not only secures the mainspring and the center wheel, but also lends a “floating” look to the movement. Having handled a few pieces from other brands with sapphire elements in their movements (like the Ulysse Nardin 4-Gong Sapphire Tourbillon or the Maitres du Temps Chapter One Round transparence), the real treat of this scarcely used component is that unless it reflects some direct light source, it tends to become practically invisible, genuinely fooling the observers’ eyes into seeing the movement’s parts as if they were floating weightlessly.

Touching on a somewhat more practical issue, the in-house movement packs an ample 80 hours of power reserve and, thanks to the inclusion of the sapphire bridge over the mainspring, the spring and its coils are exposed, making for a more unusual – and certainly less accurate – indication for the power reserve. Furthermore, the movement is vertically aligned in a way that the center of the mainspring, the hands, and the tourbillon are all set on the same longitudinal axis.

It is this layout which provides plenty of space on both sides of the going train, spaces which Arnold & Son filled up with beautiful – and rather unusual-looking – guilloche engraving, which the brand claims to be inspired by a pattern found on the cases of antique pocket watches of the manufacture. It worked back then and it clearly works now, as this pattern lends an elegant and traditional mood to the otherwise modern-looking “NAC grey” nickel silver base plate of the movement. Speaking of the grey hue of the movement, it definitely creates a refined contrast with the 44 millimeters wide red gold case which, of course, is equipped with sapphire crystals on both the case back and the dial side.

In conclusion, the Arnold & Son Royal TES Tourbillon watch is interesting in that it does not premier any new features per se, but rather it offers features in such an unusual combination that renders the watch rather unique and hardly matched by anything else out there. And so while the Arnold & Son Royal TES Tourbillon is not the first watch with an inverse movement, nor the first with a sapphire component in its movement, it still remains a highly technical and very promising novelty that reassures our feelings that Arnold & Son is on the right track and is not planning on leaving it anytime soon. The Arnold & Son Royal TES Tourbillon (reference 1SJAR.V01A.) will be available in a limited edition of 28 pieces in red gold only, with the price for one of the numbered pieces being $162,200. arnoldandson.com

Top Grade BEST FROM: aBlogtoWatch & Friends August 29, 2014 Replica Guide Trusted Dealers

Skeletonizing a watch is no easy feat. And it’s doubly hard for an ultra-thin movement, largely because the movement is already so thin that eliminating any more substance is bound to affect structural rigidity. Because of this, the A&S8200 calibre in the Arnold & Son UTTE Skeleton watch needed to be completely redesigned and re-engineered. The result is that the A&S8220 calibre, which measures 3.3mm thick. The additional thickness, based on Arnold & Son, is necessary to guarantee rigidity as they hunted to skeletonized the motion. Still, let us face it, 3.3mm for a tourbillon motion with two barrels and a power reserve of 90 hours is badly impressive.The brand new A&S8220 calibre boasts some significant revisions. As an example, the main plate was greatly modified to reveal as much as possible of their internal workings. But perhaps what’s most visible to owners is the tourbillon cage was totally reworked to show off more of the mechanism when retaining the three-dimensional design which has become a signature of the earlier Arnold & Son UTTE watch. Additionally, the tourbillon cage is relatively large when compared with the movement. It measures 14mm across, while the motion itself is 32mm. This means it’s the single most dominating component of the dial, and in addition to that is the simple fact that the cage is fully hand-polished and chamfered, making it a true visual treat for owners.And because you’d anticipate, the A&S8220 calibre can also be treated to the finest haute horlogerie completing: The main plate and bridges have been constructed using nickel silver and completed with C?tes de Genève rayonnantes; The edges will also be polished and chamfered; The steel components, gears, and ratchets are all satin-finished with their borders polished and chamfered; The screws have bevelled and polished heads, and ultimately, the stones are put in polished countersinks; Reading of the period is done off a sapphire disk with printed numerals at 12 o’clock; The hour and minute hands are golden and characteristic white lacquered tips.

We are running out of superlatives to describe F.P. Journe. Widely regarded as one of the finest watchmakers of his generation, this man famously made his own tourbillon timepiece at the age of just 27, when he decided that the only way he could afford one was to make one for himself. Today, the man and his eponymous company are responsible for some of the most technically innovative and beautifully made watches – a personal favorite of mine is the Chronomètre à Résonance. Join us in a short documentary to find out from the man himself about his views on watchmaking and what inspires and motivates him.

Next, we spend a day at the Concours d’Elegance at Pebble Beach with Rolex ambassador Jackie Stewart to talk about watches and, of course, cars. As for new watches, we check out Arnold & Son’s exquisite Time Pyramid watch, IWC’s Aquatimer Deep Three Depth Gauge and ITAnano’s affordable Phantom Carbon Automatic 49 watch. Finally, we learn more about high-end watchmaking and the roles of screws from renowned collector, Dr Bernard Cheong; and we round off the month by discovering the heritage of the one and only Moonwatch, the Omega Speedmaster.

1. Recommended Use: Understanding The Durability Of Your Mechanical Watch And When To Take It Off

Like anything else comparably refined and complicated in the world, mechanical watches need to be handled in line with their intended purposes. In the same way that you would not drive all over the place in first gear, certain mechanical watches need to be taken care of in certain ways. That sounds rather obvious but to be honest, watch brands and dealers could certainly do a better job of educating their customers on how to take care of their watches. In this article, we offer an overview on the steps one can take to ensure that their mechanical watch does not fall apart because of misuse.

Source: aBlogtoWatch

2. IWC Aquatimer Deep Three Depth Gauge Watch Hands-On

This year at SIHH 2014, IWC revealed their refreshed Aquatimer collection which, as the name suggests, is IWC’s line of dive watches. One of the more complicated pieces is the Aquatimer Deep Three Depth Gauge because, you guessed it, it features a mechanical depth gauge that measures up to 50 meters. But that is not all, the depth gauge features indicators that show both maximum depth and current depth. This is arguably the hottest watch to have this year for the well-heeled diving enthusiast.

Source: aBlogtoWatch

3. Arnold & Son Time Pyramid Watch Review

One of the most exciting brands in high-end watchmaking today is Arnold & Son. Not only are their watches exquisitely made, they are also highly complicated. But perhaps most importantly, they have, in a relatively short span of the time, managed to create their own instinctive style that makes it easy to recognize a watch as theirs. One of their most interesting pieces is the Time Pyramid watch, so-called because the movement is arranged in such a way that it looks like a pyramid. In our review of this unique-looking piece we discuss more about the brand itself as well as the countless interesting details of the Time Pyramid.

Source: aBlogtoWatch

4. ITAnano Phantom Carbon Automatic 49 Watch Review

Carbon is a very sexy material that is known for being extremely lightweight and yet strong. It has been used in aerospace and motorsports for some time now, but it was only just seven years ago that Audemars Piguet debuted what is arguably the first watch made using forged carbon. Since then, the material has more or less been exclusive to the highest of luxury brands. Fortunately, ITAnano, a company based in Italy, wants to change all that and this is their carbon watch, the Phantom Carbon Automatic 49, which retails for just under $600.

Source: aBlogtoWatch

5. Rolex Ambassador Sir Jackie Stewart On Watches, Cars, And Good Taste

Regardless what you think of their watches, Rolex is a company that goes about doing business in its own unique and fastidious way. When you think about brand ambassadors, you typically think of a brand trying to leverage the popularity of a certain personality to increase its own exposure. This is not the case with Rolex. Rolex’s approach to ambassadors is more involved and it is often a long-term relationship; just think James Cameron, Roger Federer and Sir Jackie Stewart. Join us as we speak to Jackie Stewart “The Flying Scot” at the Concours d’Elegance at Pebble Beach.

Source: aBlogtoWatch

6. Ressence Type 1 Watches Hands-On

Based on the liquid-filled Ressence Type 3, the Ressence Type 1 is a watch unlike any other. Like the former, it looks thoroughly modern and yet elegant at the same time. And while there are notable differences between the two, the Type 1 carries over the Type 3’s slick-styled case that is sandwiched in sapphire crystal. It also lacks a crown, because time is adjusted using the caseback. Do not miss our hands-on with this piece to find out more about its unique looks and special way displaying time.

Source: aBlogtoWatch

Next, our article picks from around the Web »

Cheap Wholesale Arnold & Son Time Pyramid Watch Review Replica Clearance

Based on the design of an antique clock, the Arnold & Son Time Pyramid is easily one of my favorite high-end watches of 2013. For 2014, Arnold & Son added a steel version of the Time Pyramid to the collection, offering a more affordable and still very cool model to compliment this 18k red gold ref. 1TPAR.S01A.C125A version of the Time Pyramid. Now, I bring you a more long-term review of the Time Pyramid, after getting to live with this beauty on my wrist for a while.

OK, first the bad news. Well it isn’t really bad, but I was upset to not get compliments and comments from everyone I met while wearing the Arnold & Son Time Pyramid. How do you not comment on a watch like this? Are people too shy? Yes, it is true that I didn’t go to watch gatherings or industry events with the watch – but still. This is the type of attractive mechanical watch that I know gets people excited. So why are people relatively quite about it?

width=”730″ height=”411″ frameborder=”0″ allowfullscreen=”allowfullscreen”&gt;

I think the answer has to do with the perceived complexity of the design. Looking at the face of the Arnold & Son Time Pyramid without knowing about timepieces is probably a bit intimidating. You might not know what to say. In fact, one of the things I hear from people a lot is that they want to comment on posts here on aBlogtoWatch, but don’t because they don’t feel like they have enough expertise to intelligently comment. I appreciate apprehension, but feedback is always a good thing and if presented in the right way, then people with more information are always apt to educate those with less.

Perhaps that is what I wanted from people – for them to inquire about the Arnold & Son Time Pyramid on my wrist so that I could educate them about horology and show them how this movement works. Even though the Arnold & Son Time Pyramid isn’t a totally basic movement, one can see the basic workings of a mechanical watch quite easily in the artistically designed skeletonized movement that sits between a sapphire sandwich.

Though the modern Arnold & Son is currently owned by the Citizen Group and continues to be revived in La Chaux-de-Fonds, Switzerland, the heritage of precision timekeeping, progress in escapement technology, and Breguet’s influence can nevertheless be felt with this timepiece. The Arnold & Son DBG Skeleton essentially combines two movements, each using their particular barrel, gear train, escapement, and equilibrium, combined with a single winding system and a single centralized second hand. The two dials for house time and GMT are thus powered by their own dedicated motions, allowing each to be placed independently via a double crown in 3 and 9 o’clock. Coolness factor aside, this also includes a practical advantage in being able to set GMT time into the moment, which is very beneficial when dealing with time zones cancel by 30 minutes as parts of India, Australia, and Canada.In comparison to the non-skeletonized variant of the Arnold & Son DBG we analyzed previously, this incarnation supposes some legibility in order to better display that beautifully symmetrical movement. A ring of smoked sapphire crystal glass is employed for every dial to help bring the numerals more into focus against the hectic background without completely obscuring it, and it is a smart move. GMT time may also be differentiated via the dial’s usage of skeletonized hands and Roman numerals, compared to the Arabic numerals and strong hands featured on the home time dial. Unlike the last edition, the palms on the Arnold & Son DBG Skeleton are gilded instead of blued, which is visually a nice complement to the exposed equilibrium wheels but also makes them difficult to see at a glance.

I am also a big fan of watch movements that are designed to look more or less symmetrical. Call it a weakness, but I have always been fond of such designs that make it clear the machine is meant to be appreciated visually. That is exactly what Arnold & Son did with the in-house made caliber A&S1615 manually wound movement. Of course, it needed to be nice, as there isn’t much of a dial to be found.

Having said that, reading the time is much more pleasurable than one might expect. The dial for the time begins with a ring of minute indicators and an inner ring of Roman numeral hour markers placed on a sapphire crystal. The blued steel hands are relatively easy to read and for what it is (mixing aesthetic elements with minimalism) the dial works pretty well. Just above it and one layer down on the dial is a subsidiary seconds dial. This element is slightly hard to read, but it is looked at less.

From all angles, the caliber A&S1615 is a delight to behold as it mixes silver, brass, and blued steel tones. It is also quite thin at just 4.4mm thick. Operating at 21,600 bph, the Arnold & Son Time Pyramid has a power reserve of 90 hours. As most of you know, my issue with many manually wound watches is the lack of power reserve. That isn’t an issue here, and as many already know, the Arnold & Son Time Pyramid has two of them as indicated by serpentine hands on the sides of the face.

One power reserve is for the main mainspring and the second is for the auxiliary mainspring. The concept behind the system is simple, but it requires some understanding about how mainsprings create a torque curve as they wind down over time. The idea is that when a spring is fully wound, it releases the most energy. The energy evens out to a sort of plateau during the middle of winding down, and toward the end of winding down, it has the least amount of power. This creates a difference of torque in the mainspring, which in turn has an effect on how accurate a watch is over time.

High Grade Arnold & Son DTE Double Tourbillon Escapement Watch Hands-On Grade 1 Replica Watches

This article is the 5th or 6th time that I’ve written about the Arnold & Son Time Pyramid, so for regular readers, my apologies for repeating myself. With these sexy images of this Arnold & Son Time Pyramid Steel Translucent Back I could not help but dive to the watch. In addition to the benefit of the especially colored sapphire crystal caseback with this version, I believe that the same strategy can (and should) be used on additional skeletonized dial and motion watches. It actually becomes a real problem to inhibit the attractiveness of a completely skeletonized design with the reality that if people wear these watches they don’t really need to stare in their very own skin through the dial.Inside the Arnold & Son Time Pyramid is your brand’s in-house-made caliber A&S1615 manually wound mechanical motion I continue to love. It isn’t only that the motion is designed to look cool – although it is – but rather the movement has some intriguing mechanical characteristics to boot. As an example, the dual power reserve indicators are part of a system which uses 2 mainspring barrels to get a quasi-constant force mechanism. The idea is that a primary mainspring barrel is utilized until it mostly winds down. At that stage, the energy coming from it is too unreliable to power the equipment train for precise timekeeping. So, then the secondary mainspring barrel kicks in to make sure the most continuous power so the A&S1615 movement is more precise throughout its 90 hours of power reserve.

A thin, elegant watch with nearly four days of power reserve, two separately adjustable time indications, and two tourbillons exposed on the dial: for most watch manufactures, this would likely be their top novelty piece, but for Arnold & Son, it seems to blend in with the other, highly technical pieces that the brand offers. With its sleek profile and two dials, the Arnold & Son DTE (Double Tourbillon Escapement) is a truly impressive blend of the Swiss manufacture’s UTTE ultra-thin tourbillon and its DBG double-balance wheel pieces, bringing together the best of both worlds.

The main inspiration for this technological “tour de force” is that in 2014, Arnold & Son celebrates the 250th anniversary of its watchmaking heritage. As the story goes, it was in 1764 that the company’s namesake, John Arnold was granted the permission to present to King George III a unique and small watch movement that he made. Interestingly, it was two years before, in 1762 that Arnold had established his very own workshop in London – an accomplishment most watch brands would usually consider to be a more relevant date to adhere to. Anyhow, the name and heritage that the once-British, presently Swiss made watch manufacturer carries is vast, and they certainly have been trying to live up to that.

width=”730″ height=”411″ frameborder=”0″ allowfullscreen=”allowfullscreen”&gt;

As we have previously discussed, Arnold & Son today is the “in-house brand” of high-end Swiss movement manufacturer La Joux-Perret, which in turn is presently owned by Japanese industry giant Citizen. Nevertheless, the vast know-how and immense research and development capacities of La Joux-Perret do shine through, as the Arnold & Son DTE has a lot of impressive features crammed into its 8.35 millimeters thick and 37 millimeter wide movement: its two barrels supply 90 hours worth of power reserve, with the power being delivered through two separate going trains to the two tourbillons. Despite the relatively clean and restrained appearance of the dial, there is a lot going on underneath: the movement can be wound through the crown located at the 2 o’clock position of the case, while the other crown, located diagonally across the case, is used to separately set the second time display

The two tourbillons each operate at 3 Hertz (21,600 vibrations per hour) and make a full rotation under one minute. A very characteristic design element is the large, skeletonized, red gold bridge that secures the two escapements from above, with the hand-chamfered and polished edges of the bridge and the tourbillon cage being a nod towards essential traditional watchmaking requirements. Needless to say, each tourbillon is responsible for keeping the time of its respective subdial.

Beyond mere technicalities, another interesting feat is how Arnold & Son – this brand with excessive British watchmaking heritage, modern Swiss manufacturing know-how, and Japanese ownership – manages to consistently turn out complicated, yet tasteful and distinctive-looking watches. Despite the dual-timezone layout and the two large tourbillons all finding their way onto the dial, the face of the watch looks well balanced – something that cannot be said for all other, similarly complex watches. Since there is no one large dial to cover up the movement from the front, what makes these four large circles stand out even more is the traditional Côtes de Genève striping that has been applied to the large, dial-side plate of the movement.

The two, white lacquered subdials with their painted black indices and blued and skeletonized arrow hands make for relatively small, albeit legible displays for the hours and minutes, while a seconds-hand is entirely redundant as the tourbillons make for a more interesting substitute. A little detail that may not be obvious upon first sight is that the subdial at the 12 o’clock position sports Roman numerals, while the subdial in the lower segment of the dial has Arabic numerals – although I do wonder what the face of the Arnold & Son DTE would have looked like with two absolutely identical subdials.

When we went hands-on with the Arnold & Son DTE at Baselworld 2014, the brand also had a tiny, vintage pocket watch to show with their 2014 novelty. Sebastien Chaulmontet (Arnold & Son’s head of movement development, who we interviewed for our Grail Watch article series here) said that this tiny watch with its white enamel dial, blued hands, red gold case, and exposed mechanism inspired him with the design of the Arnold & Son DTE. The similarities are quite obvious, although it is fascinating to see the differences in size and, of course, intended purpose: one was designed and made decades or perhaps centuries ago and painstakingly crafted to invisibly hide in ones pocket, while the other is relatively large (even by today’s standards, at 43.5 millimeters wide) and is worn on the wrist, where it is – for the most part – exposed for everyone to see.

In conclusion, the Arnold & Son DTE delivers, in many ways, what we have come to expect from the brand: it marks the 250th anniversary of its namesake’s achievements in a way that is relevant today and – although we can only wonder – would likely amaze John Arnold. Price for one of the 28 limited pieces of the Arnold & Son DTE in red gold is $210,000. arnoldandson.com

We Buy Arnold & Son DSTB Watch Hands-On Replica Buyers Guide

Arnold & Son produces a wide range of watches that vary in their level of romanticism, complication, and technical attributes. From their highly technical UTTE tourbillon, to the very romantic Time Pyramid, or even the complicated and impressive CTB Chronograph, Arnold & Son has an undeniable ability to turn heads with beautiful and detailed designs that instill a distinctively artistic feel to their watch making. This year at Baselworld Arnold & Son had quite a few pieces to show, including the new Arnold & Son DSTB. Like many of the watches in their Instrument collection, the Arnold & Son DSTB packs an interesting and seldom seen complication and is named as an acronym, shorthand for Dial Side True Beat.

True beat is a complication that allows the seconds hand to tick rather than sweep. The feature, which is also sometimes called “dead seconds,” is more of a technical and aesthetic accomplishment than a practical feature with tool applications. On the Arnold & Son DSTB, the entire true beat mechanism is executed in full view atop the dial, along with a focused separate display for the seconds hand. While the hours and the minutes are relegated to a subsidiary dial at four o’clock, the seconds display floats above the beautifully finished metallic dial with a three-dimensional raised sapphire scale and a blued steel hand.

Executed in a 43.5 mm 18k red gold case, the effect is wonderfully detailed, and not only is each individual element beautifully finished, but the beat seconds lever is adorned with an anchor, a nautical icon that connects throughout Arnold & Son’s designs and branding. The dial view offers a multi-layered scene that is rooted in a deep grey dial with radial finishing. The main time dial is a white lacquer with roman numerals and blued steel hands. The fine detailing continues on the flip side where a sapphire display case back allows for a view of the automatic Arnold & Son 6003 movement.

The 6003 is composed of 229 components, including 32 jewels and the dead beat mechanism visible on the dial. With a power reserve of 50 hours, this movement runs at 28,800 vph and is host to a high level of finishing.

This version was released for Baselworld 2017 and we discussed our first impressions here. Here, we will go hands-on together with the Arnold & Son DBG Skeleton and explore what makes this watch tick, besides, you know… the double balances.When it comes to assessing the importance of this watch, I consider it crucial to check at the brand’s history. Arnold & Son was founded in 1764 by John Arnold at London’s Strand. At precisely the same year, he presented a half-quarter repeater watch mounted inside a ring to King George III, which he followed up four years later with a gold and enamel minute repeater fitted with jeweled pivot holes, bimetallic temperature compensation, and a jeweled cylinder escapement. Arnold named that this watch the “No. 1,” beginning a naming convention he’d use for his significant timepieces going forward.By 1772, an Arnold “No. 3” chronometer was aboard Captain Cook’s boat when he set out for his next voyage across the Pacific, along with Arnold chronometers goes to accompany many other significant voyages over these decades. His son, John Roger Arnold, started studying watchmaking beneath Abraham-Louis Breguet at 1792 and joined his father’s business four decades later. Breguet became a great friend of John Arnold and the two collaborated on balance designs, the overcoil balance spring, and the tourbillon, although Arnold died in 1799 before this notion could be accomplished. To mourn his departure, Breguet presented his son with the very first tourbillon escapement mounted in an Arnold pocket chronometer, which also conveys a personal inscription and is today displayed in the British Museum in London.

The Arnold & Son DSTB wears a bit smaller than expected for watch with such a complex and open dial view. The red gold is matched with a lovely brown leather strap and the entire piece feels usable (thanks to the legibility of the hours and minutes display) and very special. The domed and anti-reflective sapphire crystal does an excellent job of managing reflections and ensures a clear and distortion free view of the dial and its three dimensional presentation.

Sporting a price tag of $46,500, the DSTB will be limited to just 50 units and I would wager that such a beautiful execution of a rather esoteric complication will make the DSTB quite popular with collectors and Arnold & Son fans alike. arnoldandson.com